 |
 |
 |
 |
| |
 |
|
 |
| |
|
|
| |
Residential Roofing
Let us inspect your roof for wind or storm damage
Choosing A Contractor
- Make sure the contractor is fully licensed, insured and has the ability to bond your job
- Never make any payment to the contractor until the job is completely finished. You should be 100% satisfied with the work performed before releasing any payments.
- Finally be sure the contractor is a member of the Better Business Bureau.
|
 |
| |
Re-Roofing
- When removing old singles, the contractor should inspect all decking for split or broken decking.
- Contractor should replace or re-nail decking as needed.
- Decking should be cleaned of loose debris.
- Contractor should install 15 Ib. felt paper.
- Any damaged aluminum or galvanized metal edging should be replaced.
- Shingles should be installed with 4 nails per shingle.
- Nails should be set no more than 5 5/8 inches from bottom of shingle.
- Staples should not be used under any circumstances.
- All shingles should be nailed only, not stapled
|
 |
| |
Choosing Materials
There are numerous kinds of shingles. The most common type is a 20-year, 3-tab shingle. The 20-year indicates the warranty period. There are shingles available that can reduce your homeowners' insurance rate and provide a 50-year warranty. These 50-year shingles are more expensive, but often pay for themselves with the insurance reduction. Please ask about the various shingles and what benefits each choice offers.
- When re-roofing, D.K. Haney Roofing will replace all plumbing vent flashings, valleys, air vents and install new flashing on chimneys as needed.
- D.K. Haney Roofing will supply the permit to do the job and call the city to inspect the roof, where permits are required.
- D.K. Haney Roofing will furnish the homeowner with a written lien waiver, material and labor warranty.
|
 |
| |
What To Expect From D.K. Haney Roofing |
| * |
Professional hand written estimate |
| * |
Work to be performed according to city and state codes |
| * |
Roofing to be installed according to shingle manufacturer requirements |
| * |
Landscape protection |
| * |
Inspect decking for proper installation of roofing |
| * |
4 nails per shingle, no more than 5 5/8 inch from bottom edge of shingle and on top of water line |
| * |
Install Class A fire rating material |
| * |
Keep job site clean at all times |
| * |
Roll yard and driveway with magnetic roller |
| * |
Make sure roof has enough air vents to ensure enough ventilation |
| * |
Clean gutters |
| * |
No payment until job is 100% complete (Residential customers only) |
|
| |
CUSTOMER SATISFACTION IS #1
- All our work is done with complete professionalism. Quality workmanship and customer
satisfaction are #1.
- All our installation crews are supervised and completely insured with Workman's
Compensation and General Liability Insurance.
- We are referred by many of your insurance companies and adjusters (i.e., Allied, Allstate,
American Family, State Farm, Farm Bureau, Safeco, etc.)
- All our work has a written guarantee. No empty promises.
- All of our customers get our personal touch.
|
| |
|
|
|
|
 |
|
 |
|
 |
|
|
| |
|
|
 |
 |
 |
|
 |
|
